Taper Shank Type Shaper Cutters with GB 6081
2023-04-06 08:19:39
jiangxingTools
1721
Taper Shank Type Shaper Cutters with GB 6081
These shank type shaper cutters are 20° PA, non-topping finishing cutters, for spur gears.
tooth profile can be done with GB 6082, DIN 1829, JIS B 4356, and BS 5246
Nominal pitch dia. 25mm, 38mm, module range: m1-m3.75
Diametral pitch shank type shaper cutter can be made as your request.
morse stub taper number is No. 2 or No.3
相關(guān)文章
-
Defination of Basic Hob Profiles
Defination of Basic Hob ProfilesThe basic hob profile is the normal se... - PA20° PCD 100mm Pre-shaving Gear Shaper Cutter with Module m1.25~m6
- PA20° Profile DIN3972 Standard Gear Cutter Hob with Module m3.5
- Gear Hobs for Straight Splines
- ?PA30° PCD 38mm Shank Type Gear Shaper Cutter with Module m1.75~m4
- PA20° DP8 Standard Gear Hobbing Cutter with BPⅡ
- Hobs for spur and helical gears
